Publicité
Les langues disponibles
Les langues disponibles
FM radio
1.
To select FM, press the MODE button, the display will show FM and the frequency.
To activate auto search, press and hold the ▲ or ▼ button until it starts to scan the frequency band,
2.
the display will show "Searching ... > ." or "Searching ... < .", and it will stop automatically once a
station has been found. (F. 6)
To activate manual search, repeatedly press the ▲ or ▼ button.
3.
To select audio mode, press the MENU button to toggle between the "Auto" or "Mono" selection.
4.
Note: The radio will automatically switch between the stereo and mono reception, but you can override
this and switch this function manually which is helpful for poor signal reception. During stereo reception,
the received L/R stereo sound will be automatically combined to one single channel to suit the single
speaker design of this radio.
STORING AND RECALLING STORED STATIONS
In either DAB or FM mode, you can store up to 10 stations to the favourite presets; this will enable you to
get direct access to your favourite stations.
1.
To store a preset, first tune to your desired station, then press and hold the MEMORY button,
the display will show "Empty preset 1", and the preset number will flash. (F. 7)
Press the ▲ or ▼ button to select your desired station preset number.
2.
Press the SELECT to confirm your selection, the display will show "Preset # saved" (F. 8)
3.
To recall a preset station, first press the MEMORY button once, then press the ▲ or ▼ button to
4.
scroll up or down the presets that you have stored. When the display shows your desired preset
number, release the buttons. If the preset hasn't been allocated a station, the display will show
"Empty preset
#".
F7
FACTORY RESET
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no
longer be available. If this is the case then you will need to reset your radio back to its original factory
settings; to perform a factory reset, please do the following:
1.
Plug the radio to mains and press the STANDBY/ON button to turn the radio on.
Press and hold the MENU button until the display shows "Press SELECT to confirm reset".
2.
3.
Release the MENU button and press the SELECT button once, the display will first show
"Restarting ..." and after the reset is completed, the radio will go to standby.
4.
Press the STANDBY/ON button to turn the radio on again, it will then automatically enter into the
DAB mode and perform auto scan function. After the scan has finished, the radio will select and
display the first alphanumerically found station.
Note: All of your stored DAB & FM presets will be lost once the reset has taken place.
ALARM FUNCTION
This unit incorporates an identical Dual Alarm function. You can have two individual alarm wake-up time
and wake-up mode settings to wake you to an electronic buzzer tone or your favourite radio station
(DAB/FM).
Setting the alarm time and wake-up mode
Depress and hold the ALARM button (1 or 2) until the display shows "Alarm Setting" and the hour
1.
digit of the alarm time will flash.
Repeatedly press the ▲ or ▼ buttons followed by pressing the SELECT button to adjust and confirm
2.
your desired alarm time - first set the hour and then the minute. (F.9)
3.
After the confirmation of the minute setting, the alarm time is set and you will enter into the wake-up
F6
UK-3
F8
Publicité
