Publicité
Les langues disponibles
Les langues disponibles
FEATURES AND CONT ROLS
FEATURES AND CONTROLS
1
2
3
4
5 6 7
LISTENIN G TO YOUR RADIO
Hints for better reception
This radio carries a single DAB/FM lead wire antenna, to obtain the best performance, you should fully
extend the wire antenna and adjust the position as well as the direction until you find the best reception.
For ideal DAB reception, always maintain the lead wire antenna in a vertical position (holding it upward or
downward behind the unit) is highly recommended.
Getting started
When the radio is connected to the
mode. The display backlight will be on for a few seconds and the clock will be finally displayed. Press
the STANDBY/ON button once to turn the radio on, it will then automatically enter into the DAB mode and
perform auto scan function. During the scan the display will show "Scanning ..." together with a slide bar
that indicates the progress of the scan and the amount of stations that have been found so far. (F. 1) (F. 2)
Once the scan has finished, the radio will select the first alphanumerically found station. You can now
press the ▲ or ▼ button to explore the found stations and then press the SELECT button to select your
station.
F1
Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu, you
can now press the ▲ / ▼ buttons followed by pressing the SELECT button to select "Manual tune" or
"Autoscan" for stations.
Clock setting
The clock will only set and be updated if you can receive DAB signals in your location. In order for the
clock to synchronise to the current local time, you must leave it one DAB station for a short period. Manual
clock setting is not required.
DAB auto scan
The auto scan will search for the entire DAB Band III channels. After the scan has finished, the first
alphanumerically found station will be automatically selected.
1.
To activate auto scan, first press the MENU button to enter into the Tune Select Menu and then press
the ▲ or ▼ button to select "Autoscan", finally press the SELECT button to confirm, the display will
show "Scanning ..." and a progressing slide bar.(F. 3)
2.
All the stations that have been found will be stored automatically, to explore the stations that have
been found, press the ▲ or ▼ buttons and when you find a station that you would like to listen to,
15
14
13
8
9 10 11 12
DC power jack of AC/DC adapter
17
18
16
for the first time, it will be in standby
F2
UK-1
1. SPEAKER
2.
BUTTON
◄ / ►
3. MEMORY BUTTON
4. SELECT BUTTON
5. STANDBY/ON BUTTON
MODE BUTTON
6.
7.
BACKLIGHT BUTTON
8. SNOOZE BUTTON
9. INFO BUTTON
10. MENU BUTTON
11. SLEEP BUTTON
12. MUTE BUTTON
13. ALARM 1 BUTTON
14. ALARM 2 BUTTON
15. VOLUME BUTTON
16. LCD DISPLAY
17. AC CORD
18. HEADPHONE JACK
19 . WIRE ANTENNA
Publicité
