Motorola ELITE FLIP Mode D'emploi page 7

NFC method
Using NFC (Near Field Communication), pairing is as
simple as bringing the headset and phone close to
each other.
Note: If your phone does not support NFC, use the
"Easypair method" on page 4.
To pair and connect your headset with your phone,
ensure your phone's display is on and touch the top of
the headset to your phone's NFC tag location. Hold the
headset to the phone until NFC pairing completes.
• If your headset is off (boom closed), your headset
turns on, pairs, and then turns off.
• If your headset is on (boom open), it pairs and
connects with your phone.
Note: NFC tag locations vary by phone, see your
phone's user guide.
new graphic (TBD)
Connect & go 5