Derby cycle Focus PARALANE Instructions De Montage page 12

Focus Paralane Carbon
3
Focus Paralane Carbon & Alu
4
Focus Paralane assembly instructions | P. 12
Push the fender bridge
(F.B.I) from below onto
the seat stays until
the two ends are seated
firmly on the stays.
Push the plastic hook
onto the fender and
position it approximately
by the bridge.
Focus Paralane Carbon & Alu
5
Mark
Focus Paralane Carbon & Alu
6
The longer rear stay is
marked with a small inden-
tation on the side. Screw
the stay onto the fender
with an M5 nut and M5
washer
Screw the fender onto the
bottom bracket
(M5 * 10 mm screw, M5
washer) and screw the slot
onto the seat stay bridge
(M5 * 30 mm screw, 2 x
M5 washers, M5 nut).