Ardo Calypso Mode D'emploi page 70

Electromagnetic Compatibility (EMC, IEC 60601-1-2, Table 6)
Recommended separation distance between portable and mobile RF communications equipment and
Calypso
Calypso is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The cus-
tomer or the user of Calypso can help prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and Calypso as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum output
power of transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters
[m] can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output
power rating of the transmitter in watts [W] according to the transmitter manufacturer.
NOTE 1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
70
Separation distance according to frequency of transmitter
[m]
150kHz to 80MHz
0.04
0.11
0.35
1.11
3.5
80MHz to 800MHz
0.04
0.11
0.35
1.11
3.5
800MHz to 2.5GHz
0.07
0.22
0.7
2.21
7