SAFETY INSTRUCTIONS
The
electrical
remain
installation.
— It must be possible to disconnect
the appliance from the power
supply, either using a plug or by
fitting a switch on the fixed wiring
system
in
installation rules.
— If the power cable is damaged, it
should
be
manufacturer, its after-sales service
department or by a similarly
qualified person in order to avoid
danger.
— This appliance may be installed
either under a worktop or in a
cabinet column, as indicated on the
installation diagram.
— Centre the oven in the unit so as
to ensure a minimum distance of 10
mm between the appliance and the
surrounding unit. The material of
the unit supporting the appliance
must be heat-resistant (or covered
with a heat-resistant material). For
greater stability, attach the oven to
the unit with 2 screws through the
holes provided on the side panels.
— In order to avoid overheating,
the appliance must not be installed
behind a decorative door..
— This appliance is designed to be
used for domestic and similar
applications such as:
Kitchen areas for the staff of shops,
offices and other professional
premises; Farms; Use by clients of
hotels, motels and other residential
plug
accessible
accordance
replaced
by
must
type establishments; guest house
after
type environments.
— The oven must be turned off
when cleaning inside the oven.
Do not modify the characteristics of
this appliance; doing so could be
with
dangerous.
Do not use your oven as a larder or
to store any items after use.
the
ENGLISH