Bosch GTL 3 Professional Notice Originale page 21

OBJ_BUCH-828-004.book Page 21 Friday, May 16, 2014 1:02 PM
Laying of Square Tiles (see figure B)
Position the measuring tool in one corner so that the 0°
laser line runs parallel to one wall. Lay the first square tile
at the crossing point of the 0° and the 90° laser lines.
Laying with Diagonal Pattern (see figure C)
Position the measuring tool so that the 45° laser line
marks the diagonal tile joint.
Tile laying in Kitchenettes (see figure D)
Firstly determine the height at which the first tile row
begins. Fix the measuring tool with the levelling plate 10
vertically on the wall so that the 90° laser line marks the
lower edge of the first tile row.
Laying from Edges (see figure E)
Position the measuring tool on the levelling plate 10 at the
edge so that a lateral cut-out 11 of the levelling plate is
directly at the edge. The 0° laser line should run parallel to
one edge. The 90° laser line now marks the lower tile row.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the sup-
plied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use
any cleaning agents or solvents.
Regularly clean the surfaces at the exit opening of the
laser in particular, and pay attention to any fluff or fibres.
If the measuring tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an authorised after-sales service centre for
Bosch power tools. Do not open the measuring tool your-
self.
In all correspondence and spare parts orders, please al-
ways include the 10-digit article number given on the type
plate of the measuring tool.
In case of repairs, send in the measuring tool packed in its
protective pouch 12.
Bosch Power Tools
After-sales Service and Application Service
Our after-sales service responds to your questions con-
cerning maintenance and repair of your product as well as
spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer ques-
tions concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or
arrange the collection of a product in need of servicing or
repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
English | 21
1 609 92A 0L0 | (16.5.14)