Metered Models - ALLIANCE D677I Installation/Fonctionnement/Entretien

Metered Models

*54.8 cm (21.56 in.)
Coin Slide Models
*56 cm (22.06 in.)
Electronic Control Models
59.7 cm
(23.5 in.)
*With leveling legs turned into base.
*54.8 cm (21.56 in.)
Coin Slide Models
*56 cm (22.06 in.)
Electronic Control Models
59.7 cm
(23.5 in.)
*With leveling legs turned into base.
1 3/8 in. NPT Gas Connection
NOTE: Side, rear and bottom exhaust openings are
10.2 cm (4 inch) ducting. Gas models cannot be
vented out left side of cabinet because of burner
housing.
512681
20.3 cm
(8.0 in.)
1.02 cm
71.1 cm
(0.4 in.)
(28 in.)
ELECTRIC MODELS
20.3 cm
(8.0 in.)
1.02 cm
71.1 cm (0.4 in.)
(28 in.)
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
*102 cm (40.19 in.) Coin Slide Models
*97 cm (38.19 in.) Electronic Control Models
39.1 cm
(15.4 in.)
10.2 cm
68.3 cm
(4.0 in.)
(26.9 in.)
*102 cm (40.19 in.) Coin Slide Models
*97 cm (38.19 in.) Electronic Control Models
6 cm
(2.3 in.)
39.1 cm (2.8 in.)
(15.4 in.)
1
68.3 cm
(26.9 in.)
GAS MODELS
IMPORTANT: The dryer should have sufficient
clearance around it for needed ventilation and for
the ease of installation and servicing. For maximum
drying performance, we recommend that more
clearance be allowed around the dryer than the
clearances that are listed throughout this manual.
DRY2241N
7 cm
Installation
DRY2241N
DRY2242
DRY2242N
7