Step 4: Set Fabric Selector; Step 5: Start Dryer - ALLIANCE D677I Installation/Fonctionnement/Entretien

Operation

Step 4: Set Fabric Selector

Select NORMAL for cottons, PERM PRESS/
CASUAL for permanent press, DELICATE for
sensitive items or FLUFF (NO HEAT) for items that
require no heat.
NOTE: Always follow manufacturer's care label
instructions.
PERM PRESS
CASUAL
NORMAL
FABRIC SELECTOR
Figure 38

Step 5: Start Dryer

Nonmetered Models
Rotate timer knob to desired time setting (up to
60 minutes). Press the PUSH-TO-START button.
IN USE light will come on (indicating start of cycle).
NONMETERED MODELS
Figure 39
34
DELICATE
NO HEAT
DRY2185N
DRY2101N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Coin Slide Models
Place coin(s) in slide and carefully push in as far as
possible and then pull slide out as far as possible. After
IN USE light comes on (indicating start of cycle),
press the PUSH-TO-START button.
METERED MODELS
Figure 40
Remove knits when slightly damp because overdrying
may cause shrinkage. Do not tumble dry knit woolens.
Should dryer stop before cycle is completed, the motor
overload protector may have cycled. Refer to
Maintenance section.
NOTE: This machine includes an extended tumble
feature. Starting 20 minutes after a cycle ends, the
cylinder will tumble for two minutes every hour
without heat, up to 18 hours or until door is opened.
W297I
W297I
512681