Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

o Suck up liquid. Stop sucking up liquid when the liquid level inside the dust
compartment has reached the maximum level indicated.
o Empty and dry the dust compartment each time you have used the appliance to suck
up liquid.

Cleaning

When you have used the appliance to suck up liquid, always empty and dry the dust
compartment after use. Clean the appliance with a damp cloth.
o Hold the appliance over a dust bin, press the dust compartment release button(1) and
remove the dust compartment (2) (Fig.5).
o Remove the filter unit from the main section (Fig.6).
o Empty the dust compartment by shaking it with your free hand (Fig.7). If necessary,
clean the dust compartment with a damp cloth. Make sure you empty and clean the
dust compartment regularly.
Note: If there is liquid in the dust compartment, empty the dust compartment and wipe it dry.
o Clean the filter unit: Take the filter unit out of the dust compartment shake it over a
dust bin to release the dust. If necessary, clean the filter unit with a damp cloth. Clean
the filter unit with a brush or with another conventional vacuum cleaner if it is very
dirty.
Note: If necessary, you can clean the filter unit in cold or lukewarm water.
Dry the filter thoroughly before installing it back in the dust compartment.
o Put the filter unit back on the dust compartment. (Fig.8).
o To reattach the dust compartment, align the slot on the dust
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1) and then push the top of the dust
compartment towards the appliance (2) until it locks into place ("click")
(Fig.9).
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
36

Publicité

Table des Matières
loading

Table des Matières