Trouble Shooting - Rotel U604CH1 Mode D'emploi

o Let the vacuum cleaner run until it
stops, undo the screws and open
the vacuum cleaner. (Fig 11)
o Cut the connecting wires one by
one and remove the batteries. (Fig
12)
 TROUBLE SHOOTING
This chapter summarises the most common problems you could encounter with your
vacuum cleaner. Please read the relevant sections for more details.
Problem
The appliance does not work
The charging light does not go
on
The vacuum cleaner does not
vacuum properly
Dust escapes from the vacuum
cleaner
The vacuum cleaner does not
work properly when one of
the accessories is attached to
the nozzle.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Solution
The batteries may be low. Recharge the batteries.
You may not have inserted the correctly into the wall
socket.
Insert the adaptor correctly into the wall socket.
The appliance may have been switched on while it was
on charge. Make sure the appliance is switched off
when you charge it.
Make sure that the adaptor is inserted correctly into
the wall socket and that the appliance is switched off.
The dust compartment may not be attached properly
to the appliance. Attach the dust compartment
properly to the appliance.
The dust compartment may be full. Empty the dust
compartment.
The filter unit may be clogged. Clean the inner filter
and the outer filter (Refer to the chapter "Cleaning")
The dust compartment may be full. Empty the dust
compartment.
The dust compartment may not be attached properly
to the appliance. Attach the dust compartment
properly to the appliance.
Perhaps the filter unit is not placed properly in the dust
compartment. Place the filter unit properly in the dust
compartment.
The dust compartment may be full. Empty the dust
compartment.
The accessory may be clogged. Remove the
obstruction from the accessory.
38