KERN YKF-01 Notice D'installation page 5

GB
1 Installation
Attach the pedal to the device, as shown on the picture below.
2 Supplied elements
• Pedal
• Connector box
• 1 cable
3 Usage
The pedal is used to send weight values to a printer or a computer. Besides, it can be
used to balance the scale.
3.1 Taring the scale
 Turn the scale on using the ON/OFF button.
 In weighing mode press and hold the PRINT button until the "Unit" menu is dis-
played.
 Press the MODE button until the "FOOt S" parameter is displayed.
 Confirm using the SET button, which will display the current setting.
 Using the Mode button select the "tAr" setting and confirm it, using the SET but-
ton.
 Place the scale container.
 Press the pedal – the scale will display a zero result.
YKF-01-IA-e-1812
KERN YKF-01
Version 1.2 2018-08
Installation manual
Pedal
Only for KERN PCD and KERN PCB.
2