Publicité
Les langues disponibles
Les langues disponibles
Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.
Description (fig. A)
Your 332000/332001 Princess vacuum cleaner
has been designed for vacuuming dry
substances. The appliance is not suitable for
vacuuming wet substances. The appliance is
suitable for domestic use only.
1. On/off button
2. Mains cable rewind button
3. Handgrip
4. Dust compartment
5. Release lever (dust compartment)
6. Hose
7. Tube
8. Extension tube
9. Suction nozzle
10. Floor surface selector
11. Crevice nozzle
12. Brush nozzle
13. Upholstery nozzle
14. Accessory holder
Assembly
Before you proceed, we need you to pay
attention to the following notes:
-
Before assembly, always remove the mains
plug from the wall socket.
Mounting and removing the dust
compartment (fig. B)
Before you proceed, we would like you to
focus your attention on the following notes:
-
Do not use the appliance without the dust
compartment.
-
Make sure that the motor filter and the
HEPA filter are placed in the filter holder
and the filter holder is placed in the dust
compartment.
•
To mount the dust compartment, pull the
release lever (5) and place the dust
compartment (4) onto the appliance until
it clicks into place.
•
To remove the dust compartment, pull the
release lever (5) and lift the dust
compartment (4) from the appliance.
Mounting and removing the hose
(fig. C)
Before you proceed, we would like you to
focus your attention on the following notes:
-
Make sure that the dust compartment is
placed on the appliance.
•
To mount the hose (6), insert the hose
outlet (15) into the hose connection (16)
and turn the hose outlet (15) clockwise as
far as possible.
•
To remove the hose (6), turn the hose outlet
(15) counterclockwise and pull the hose
outlet (15) from the hose connection (16).
Mounting and removing the tube
(fig. D)
•
To mount the tube (7), insert the hose inlet
(17) into the tube outlet (18).
•
To remove the tube (7), pull the hose inlet
(17) from the tube outlet (18).
Mounting and removing the
suction nozzle (fig. E)
The suction nozzle (9) can be mounted to the
extension tube (8).
•
To mount the suction nozzle (9), insert the
tube inlet (19) into the tube connection
(20).
•
To remove the suction nozzle (9), pull the
tube inlet (19) from the tube connection
(20).
Mounting and removing the
accessories (fig. D & E)
The crevice nozzle (11) can be used for
vacuuming in narrow and hard-to-reach places.
The brush nozzle (12) can be used for
vacuuming tables, desks and shelves.
The upholstery nozzle (13) can be used for
vacuuming upholstery, curtains and other items
made of fabric. The accessories can be mounted
to the hose (6) or to the extension tube (8).
•
To mount the accessory to the hose (6),
insert the hose inlet (17) into the accessory.
•
To mount the accessory to the extension
tube (8), insert the tube inlet (19) into the
accessory.
11
Publicité
