Melitta bar-cube cw Mode D'emploi page 16

Content
Keep these instructions available in case of questions
at some later time.
Drawing: Operating the unit
Stainless steel bottoms, cup warmer .............. 6
Switch "Cup warmer on/off" ........................... 6
Supply line with power plug ....................... 5, 6
1. What is used where ............................ 3, 4
2. Description.............................................. 4
GB
3. Purpose .................................................. 4
4. Technical data ........................................ 4
5. Installation .............................................. 5
6. Safety instructions ................................ 5
7. Use ......................................................... 6
8. Cleaning ................................................. 6
9. Preventive maintenance......................... 7
10. Disposal .................................................. 7
11. Customer service contact information .. 8
2. Description
This device is a cupboard with three warming plates
for keeping coffee cups and glasses ready for use. The
casing is made of stainless steel.
The design of this device enables compliance with the
operator duties from the accident prevention
regulations for electrical safety in commercial
applications.
3. Purpose
This device is intended for the setup and use of the
coffee machine MELITTA
dry rooms.
This device is not intended for other purposes and not
for use outdoors.
4. Technical data
Line supply..........................:
Nominal rating .....................:
Cup capacity .......................:
Ambient temperature ...........:
Warming plate temperature .:
Heating time ........................:
Continuous sound
pressure level (Lpa).............:
Dimensions (WxHxD) ..........:
Empty weight.......................:
Technical changes reserved
4
®
bar and bar-cube in closed,
230 V / 50 Hz
135 W
ca. 60...120 cups
min. 5 - max. 30° C
< 80° C
Approx. 60 min.
< 70 dB(A)
280 x 465 x 430 mm
Approx. 14 kg