Publicité
Les langues disponibles
Les langues disponibles
FIXED SALAMANDERS
Salamander SGF 800 is fitted with two infrared burners with safety thermocouple, a
removable inside tray, two racks enabling to adjust the grid with handles on 3 levels
to adapt cooking position.
To turn on the device, just approach a long matchstick or gas lighter near the pilot
light located under the top (n°2 on picture), press and turn the control knob (n°1 on
picture) in front of star position.
Keep the control knob (n°1 on picture) pressed for 15 seconds. The burner then re-
mains lit.
While cooking, the temperature can be regulated using the control knob (n°1 on pic-
ture) from high flame to low flame in order to avoid over-cooking.
A safety thermocouple cuts the gas supply if one of the burner is extinguished. In
this particular case, just turn on the device again as explained before
The low flame of the appliance is pre-adjusted in the factory, it must not be changed.
2
1
Power control knob + on/off
Pilot light
1
2
5. FUNCTIONING / HANDLING
a) Installation/Assembly:
- Unpack carefully the machine from its packaging.
- Place the device on a plane and heatproof surface in a well ventilated place.
14
Publicité
