troubleshooting
pROblem
Motor dows not start.
Suction force is gradually
decreasing.
cord does not rewind fully.
Vacuum cleaner dows not
pick up dirt.
low or decreasing suction
This Vacuum cleaner is approved the following.
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
14_ troubleshooting
sOlUTION
•
Check cable, pulg and socket.
•
Leave to cool.
•
Check for blockage and remove.
•
Pull the cord out 2-3m and push down the cord rewind button.
•
Check hose and replace if required.
•
Please check filter and, if required, clean as illustrated in the
instructions.