Amibot Animal Premium Manuel D'utilisation page 38

EN
Troubleshooting
The robot
03
does not move
correctly
Appliance
04
suction lost
The appliance
05 is hard to
manoeuvre.
Scheduling
06 does not work
correctly.
1. The floor is wet.
2. The dust bin is not
attached correctly.
3. The central Animal
brush is not inserted
correctly.
1. The dust bin is full.
2. The central Animal
brush or the side
brushes are blocked.
1. The wheels are
jammed.
2. The gap and
obstacle sensors are
dirty.
1. The robot is not
switched on.
2. The robot battery is
weak.
3. The dust bin is full.
4. Scheduling has been
cancelled.
36
1. Dry the floor.
2. Remove and reinsert the
dust bin.
3. Remove and reinsert the
brush in its cavity.
1. Empty the dust bin, clean
the motor and the filters.
2. Remove any hair and
debris from the brushes.
Check that there is no dirt
obstructing the robot.
1. Clean the vacuum wheels
and remove the hair and
other debris caught up
around them.
2. Gently clean all of the
sensors on the appliance.
1. Switch the robot on.
2. Recharge the robot before
starting a new cleaning
cycle.
3. Remove the dust bin and
empty it before reinserting
it.
4. Check the schedule and
reschedule the cleaning
cycle, if necessary.