Cycles - Whirlpool WHP1000SQ Guide D'utilisation

To Add Items
1. Select PAUSE/CANCEL once. The washer door unlocks, and
items can be added.
2. To continue the cycle, close the door and select START (for
approximately 1 second).
3. To unlock the door after the Add a Garment period, press PAUSE/
CANCEL twice, this will cancel the Wash Cycle.
Done
When the wash cycle is complete, the DONE status light will
illuminate, the door unlocks, and the wash load can be removed
from the washer. The washer powers down automatically
60 minutes after the cycle is complete and the DONE status
light turns off.
Controls Lock/Unlock
The Controls Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When Controls Lock is lit, all
buttons are disabled except for Pause/Cancel and Start. You can
lock the controls while the washer is operating.
To lock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds after the
cycle starts, or when the washer is turned off.
The status light next to the CONTROLS LOCK/UNLOCK button
will glow.
To unlock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until
the status light turns off.
NOTE: To lock or unlock the controls when the washer is off,
press and hold CONTROLS LOCK/UNLOCK for 3 seconds.
Door Locked
When the Door Locked light glows, the door is locked.
Suds Rinse
The Suds Rinse light will glow if excessive sudsing is detected
in the cycle and an automatic extra suds rinse will be performed.
The Suds Rinse will remove extra suds and assures proper rinsing
of your garments. The cycle time will be extended by the Suds Rinse
if necessary. See "Troubleshooting".
Sensing/Revising Estimated Time
The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load.
The washer will automatically sense the progress of the cycle and
adjust the Estimated Time Remaining display. While the washer
is sensing, the estimated time is replaced by rotating stripes in the
display. When the sensing is complete, the animation stops and the
Estimated Time Remaining is updated.
The cycle time will be extended if oversudsing occurs or the load
is unbalanced. See "Troubleshooting." During the unbalance routine,
the time displayed may pause until this activity is complete, then
resume with the remainder of the cycle.
14
ECO Monitor
Your washer is specially designed to conserve energy and water.
Each cycle, along with any selected options, will result in different
energy and water usage. To use the ECO Monitor, choose the best
cycle for the fabrics being washed, then adjust temperature and spin
speed options to improve the energy usage within that cycle.
Cycles can be selected by turning the Cycle Control knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels. The modifier indicator lights, on the right-hand
side of the panel, will change as cycles are selected.
■ Each cycle has a preset Soil Level (estimated cycle time),
Water Temperature, and Spin Speed, and may have preset
options. The preset settings provide the recommended fabric
care for the selected cycle.
■ The preset settings will glow green to show the preselected
options and modifiers, and can be changed anytime before
START is pressed. Not all options and modifiers are available
with all cycles. Available selections glow amber. (To change
settings after the cycle has started, press PAUSE/CANCEL
once, then select the desired settings. Press START to continue
the cycle.)
■ Powdered detergents may not dissolve well in a slow-speed
cycle. For best results, use liquid detergent in slow-speed

cycles.

Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature,
and Spin Speed. The preset settings provide the recommended
fabric care for the selected cycle. See chart.
Cycle
Soil Level
(cycle time)
Allergen Heavy
(1:35)
Whitest Normal
Whites (1:20)
Heavy Duty Heavy
(1:20)
Bulky Items Normal
(1:00)
Normal/ Normal
Casual (0:50)
Delicate Normal
(0:40)
Darks Normal
(1:00)
Cycles
Water Temp Spin Speed
Hot/Cold Extra High
Hot/Cold Extra High
Warm/Cold Extra High
Warm/Cold Extra High
Warm/Cold High
Warm/Cold Medium
Warm/Cold High