Cycles - Whirlpool Cabrio WTW6300WW0 Guide D'utilisation Et D'entretien

10. Select Delay Wash, if desired (on some models). See "Delay
Wash" in the "Modifiers" section.
11. Press START. The wash cycle begins, and the display shows
the estimated remaining time. The lid will lock.
NOTE: If you do not press Start within 5 minutes of pressing
Power, the washer automatically shuts off.
Turn the knob to choose the right wash cycle for the type of
fabrics you are washing. When the knob points to a cycle, the
indicator light for the cycle will glow and the indicator light for
Start will blink. If the default settings for the Modifiers and Options
are acceptable, you may press Start to begin the wash cycle.
Preset Cycle Settings
For ease of use, preset cycle settings provide the recommended
fabric care settings for each cycle.
To use the preset cycle settings:
1. Press POWER.
2. Select the cycle you want by turning the knob. The preset
cycle settings will be displayed (see the following chart).
NOTE: The preset cycle times may vary slightly depending on
your model.
3. Press START. The wash cycle will begin.
Preset Cycle Settings
Cycle Preset
Minutes*
Whitest Whites 79
Heavy Duty 63
Bulky Items/
52
Comforters
Sheets
49
Normal 41
Casual/Perm Press 44
Colors/Towels
45
Quick Wash 33
Wool 35
Delicate/Handwash
36
Soak 41
8

Cycles

Soil Wash/
Level** Rinse Temp
Heavy Hot/Cold
Heavy Hot/Cold
Normal Warm/Cold
Normal Warm/Cold
Normal Warm/Cold
Medium Warm/Cold
Normal Cold/Cold
Light Warm/Warm
Light Warm/Cold
Light Cold/Cold
Medium Warm/Cold
Cycle Preset
Minutes*
Rinse & Spin 24
Drain & Spin 14
Clean Washer
60
*These times are for reference only and may not match your
model exactly.
**Cycle time in minutes will appear in the display while you are
making selections. The total cycle time will appear, including an
estimated time for drain and fill times, once Start is pressed.
NOTE: Load only to the top of the basket. Overloading can cause
poor cleaning. See "Starting Your Washer."
Whitest Whites
This cycle introduces liquid chlorine bleach to the load at the
proper time for improved whitening of your heavily soiled white
fabrics. Cycle combines high-speed wash action and high-speed
spin speed. For maximum soil and stain removal, liquid chlorine
bleach must be used.
Heavy Duty
Use this cycle for heavily soiled or sturdy items. Cycle combines
high-speed wash action and high-speed spin. Deep Clean and
Spray Rinse are the default options for this cycle, but they can be
turned off. See "Changing Cycles, Modifiers, and Options."
Bulky Items/Comforters
Use this cycle to wash large items such as comforters, pillows,
and sleeping bags. This cycle starts with a soak to thoroughly
saturate your large load. This is followed by medium wash action
and medium spin speeds to maintain load balance.
Sheets
Use this cycle for sheets, pillowcases, and blankets. The wash
action of this cycle is designed to keep large items from tangling
and balling up.
IMPORTANT: For best performance, drop items in loose heaps
evenly around the basket wall. Do not load items directly on the
impeller for this cycle.
Normal
Use this cycle for normally soiled cottons and mixed fabric loads.
Cycle combines high-speed wash action and high-speed spin.
Spray Rinse is the default option for this cycle, but it may be
turned off.
Casual/Perm Press
Use this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press, and
blends. This cycle uses medium-speed wash action, a low-speed
spin, and a cool down process to reduce wrinkling.
Colors/Towels
Use this cycle for lightly soiled, colored clothing, or towels. This
cycle uses low to medium-speed wash action and high-speed
spin. For best results, use cold or warm water.
Soil Wash/
Level** Rinse Temp
Not Cold/Cold
applicable
Not Not
applicable applicable
Not Not
applicable applicable