E-Bench KH 350 Instructions D'utilisation page 74

O
PERATING INSTRUCTIONS
4. MIX button
5. BAND button
INTRO button
6.
7. MEMO-UP/REPEAT button
8. MODE/REMAIN button
9. MEMO/PROGRAM button
10. VOLUME +/— buttons
11. PLAY/PAUSE button
12. STOP button
13. CD button
14. OPEN/CLOSE button
15. AUX button
16. TUNER button
17. TUNING/SKIP/SEARCH +/— buttons
S
WITCHING THE SYSTEM ON
Connecting the loudspeakers
To connect the loudspeakers, connect each black cable to the (—) connecting terminal and each
red cable to the (+) connecting terminal at the back of the appliance.
Mains operation
Before you continue, check whether the mains voltage stated on the back of the appliance corre-
sponds with your local mains voltage. Then insert the mains plug of the appliance into a socket.
Inserting the batteries into the remote control
Open the lid of the battery compartment. Insert the batteries (2xAAA, not included in the scope of the
delivery) as indicated by the positive and negative pole markings. Close the battery compartment.
Note: If the equipment is not be used for a long period, take the batteries out of the remote control.
Setting the time
• After pressing the MEMO/PROGRAM button in the standby mode, press the SKIP/SEARCH but
tons (forwards/backwards) until the correct hour appears on the display.
• Press the MEMO/PROGRAM button again and then press SKIP/SEARCH (forwards/backwards)
until the correct minute appears on the display.
• Press the MEMO/PROGRAM button. The correct time will now appear on the display.
Adjusting the volume
To adjust the volume, press the +/— button.
P CD
LAYING A
• Press the CD button.
• Open the CD compartment with the OPEN/CLOSE button.
• Insert the CD with the labelled side facing upwards in the CD compartment.
• Close the CD compartment. When the CD starts, the total number of tracks will appear on
the display.
• Press the CD PLAY/PAUSE button. The fi rst track of the inserted CD is played. The display
indicates the number of the current track and the playing time of the track.
• To activate the pause function, press the PLAY/PAUSE button. The display indicates how
much of the track's playing time has lapsed. To continue playing the CD, press the PLAY/
PAUSE button.
• To stop the CD, press the CD STOP button. The display indicates the total number of tracks
and the total CD playing time.
Changes display: track playing time/remaining
playing time of entire CD
74