Operating Instructions - E-Bench KH 350 Instructions D'utilisation

O
PERATING INSTRUCTIONS
T
ECHNICAL DATA
General
Mains voltage
Output
CD player
Laser
Radio
Frequency range VHF/FM
Frequency range MW/AM
Aerials
FM
AM
O
PERATING INSTRUCTIONS
Warning and Safety Information
Please read the operating instructions very carefully prior to using the device and ensure that
they are kept and easy to fi nd for future reference. All precautionary and safety procedures
should be followed exactly as well as the following safety procedures.
Caution! Danger of electric shock!
Never open the appliance or component housings! None of the components included within
the scope of the delivery can be serviced by the user. Any servicing is to be carried out by
qualifi ed personnel only.
This warning symbol informs the user of the dangerous voltage in the device.
This warning symbol informs the user of important operating information for this device
Warning!
Non-perceivable escape of laser radiation if the device interlocks are opened or damaged.
Avoid any contact, especially eye contact, with the laser beam! Danger of serious eye inju-
ries exists.
S -
ETTING UP THE DEVICE
• When setting-up the device ensure that it is not in the immediate vicinity of water, e.g. on
a bathtub, wash basin, rinsing sideboard, in damp cellars, next to a swimming pool, etc.
• When setting-up the device ensure that it is not in the immediate vicinity of heat sources,
e.g. ovens, air heaters or other heat generating devices.
• Ensure that the device is set-up upon a stable and level base.
• The device must be set-up in a place that guarantees suffi cient all-round ventilation. The
distance between the device's rear-side and wall should not be less than 10 cm, also not less
than 10 cm above the device and at least a 5 cm space on either side. Thus the device should
not be placed in book shelves, other closed off cabinets or on wall shelving units fi lled with
other items. In addition, the ventilation can be impaired if the device is placed on a bed,
blanket or similar surface.
• Ensure that no foreign substances or liquids can enter the device through the ventilation inlets.
AC: 230 V ~ 50 Hz
2 x 5 W RMS/sine-waves power
100 Watt PMPO
semi-conductor laser
87.5 MHz to 108 MHz
522 kHz to 1620 kHz
dipole aerial
built-in ferrite aerial
72