Storch HPM contact Mode D'emploi page 56

Selecting the material characteristic
Press the
characteristic for measurement. For this purpose, briefly press
the button and select the desired characteristic.
Tilting the display view
Depending on the position of the moisture measuring device
you have the option to tilt the display in clockwise direction to
be able to conveniently read out the measured values. Press
the button to change the display.
Menu selection
Simultaneously press
The following options are available for selection:
1. Temperature compensation (default: 20 °C) – maximum
precision as a result of manually entering the ambient tem-
perature (0°C to +50°C). (Refer to the "Accessories" section
for more information)
button to select the corresponding material
and
56
to open the menu.