Restoring Default Settings - GE AF-650 GP Guide Rapide

User Interface
5.2 Backup and Copying Parameter Settings
Programming data is stored internally in the drive.
•
The data can be uploaded into the Keypad
memory as a storage backup
•
Once stored in the Keypad, the data can be
downloaded back into the drive
•
Data can also be downloaded into other
adjustable frequency drives by connecting the
Keypad into those units and downloading the
stored settings. (This is a quick way to program
multiple units with the same settings.)
•
Initialization of the drive to restore factory default
settings does not change data stored in the
Keypad memory
WARNING
UNINTENDED START!
When the drive is connected to AC line power, the motor
may start at any time. The drive, motor, and any driven
equipment must be in operational readiness. Failure to
comply could result in death, serious injury, equipment or
property damage.
5.2.1 Uploading Data to the Keypad
1. Press [OFF] to stop the motor before uploading
or downloading data.
2. Go to K-50 Keypad Copy.
3. Press [OK].
4. Select All to Keypad.
5. Press [OK]. A progress bar shows the uploading
progress.
6. Press [Hand] or [Auto] to return to normal
operation.
5.2.2 Downloading Data from the Keypad
1. Press [OFF] to stop the motor before uploading
or downloading data.
2. Go to K-50 Keypad Copy.
3. Press [OK].
4. Select All from Keypad.
5. Press [OK]. A progress bar shows the
downloading process.
6. Press [Hand] or [Auto] to return to normal
operation.
AF-650 GP Quick Guide

5.3 Restoring Default Settings

CAUTION
Initialization restores the unit to factory default settings.
Any programming, motor data, localization, and
monitoring records will be lost. Uploading data to the
Keypad provides a backup prior to initialization.
Restoring the drive parameter settings back to default
values is done by initialization of the adjustable frequency
drive. Initialization can be through H-03 Restore Factory
Settings or manually.
•
•
•
5.3.1 Recommended Initialization
1.
2.
3.
4.
5.
6.
7.
Default parameter settings are restored during start-up.
This may take slightly longer than normal.
8.
9.
5.3.2 Manual Initialization
1.
2.
Factory default parameter settings are restored during
startup. This may take slightly longer than normal.
DET-759A
Initialization using H-03 Restore Factory Settings
does not change drive data such as operating
hours, serial communication selections, personal
menu settings, fault log, alarm log, and other
monitoring functions
Using H-03 Restore Factory Settings is generally
recommended.
Manual initialization erases all motor,
programming, localization, and monitoring data
and restores factory default settings.
Press [Main Menu] twice to access parameters.
Scroll to H-03 Restore Factory Settings.
Press [OK].
Scroll to [2] Restore Factory Settings.
Press [OK].
Remove power to the unit and wait for the
display to turn off.
Apply power to the unit.
Alarm 80 is displayed.
Press [Reset] to return to operation mode.
Remove power to the unit and wait for the
display to turn off.
Press and hold [Status], [Main Menu], and [OK] at
the same time and apply power to the unit.
5 5
23