Daily Use - ZANKER KDT10012FK Notice D'utilisation

max
A
-
+ -
3

Daily use

1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode, re-
fer to 'SETTING AND STARTING A PRO-
GRAMME'.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid
dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the type of
load and the degree of soil.
Using the detergent
1
20
4
2
To adjust the released quantity of rinse aid, turn the
selector between position 1 (lowest quantity) and po-
sition 4 (highest quantity).
3
4
Setting and starting a programme
Setting mode
The appliance must be in setting mode to accept some
operations.
The appliance is in setting mode when, after the activa-
tion, all the programme indicators are off and the end
indicator flashes.
5
If the programme has a
prewash phase, put a
small quantity of deter-
gent on the inner part of
the appliance door.