Faro Barcelona 33356 Instructions D'installation page 20

ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES INSTRUZIONI DI SICUREZZA / ΟΔΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
MAKE WIRE CONNECTINS FOR LIGHT KIT
Insert wires existing from light kit fitter by passing through centre hole and attach light kit fitter to switch housing cover
threaded tube and / or fasten with spring washer and hex nut.
Loosen screws on terminal block first, for
accepting new wires from light kit.
1- insert orange wire from light kit into terminal
block extending from fan and tighten by screw
on terminal block.
2- insert blue wire from light kit into terminal
block extending from blue wire from fan and
tighten by screw on terminal block.
LIGHT KIT INSTALLATION
33356-33357 Hierro
1- Orange wire from light kit to orange wire
from fan and connect by wire nut.
2- Blue wire from light kit to blue wire from fan
and connect by wire nu.
Faro 19