Faro Barcelona 33356 Instructions D'installation page 17

ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ / INSTRUCTION DE SÉCURITÉ / SAFETY INSTRUCTIONS / INSTRUÇÕES DE SEGURANÇA / SICHERHEITSHINWEISE /
VEILIGHEIDSINSTURCTIES INSTRUZIONI DI SICUREZZA / ΟΔΗΓΊΕΣ ΑΣΦΑΛΕΊΑΣ / ИНСТРУКЦИИ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ
CAUTIONS ENGLISH
Read entire booklet carefully before beginning installation and save these instructions.
To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these
instructions, and use only the hardware supplied.
To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to
the outlet box and associated wall switch location.
All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should
use a qualified electrician.
To reduce the risk of personal injury, do not bend the blade attachment the system when installing, balancing or
cleaning the fan. Never insert foreign objects between rotating fan blades.
To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan by the lead wires.
The fan blades cannot be installed lower than 2,3m from the floor.
NOTE:
The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible
conditions and situations that may occur. It must be understood that common sense, caution and carefulness are factors
which cannot be built into this product. These factors must be supplied by the person(s) installing, caring for and operating
the unit.
TOOLS AND MATERIALS REQUIRED
ELECTRICAL OUTLET BOX
INSTALL MOUNTING BRACKET
Attach the hanger bracket to outlet box using screws provided with outlet box. Install square rubber washer between bracket
and outlet box to reduce vibration of metal to metal surface.
To reduce the risk of fire, electrical shock, or personal injury, mount to outlet box marked acceptable for fan support and use
mounting screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting fixtures are not
acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt
33356-33357 Hierro
Faro 16