Würth 0891 385 005 Manuel D'utilisation page 10

Read the instructions carefully before using the appliance!
Take good care of the instructions for use for later reference.
Application
The pressure spray appliance item No. 0891385005 is intended for spraying special high­performance cleaner
item No. 0893037020 and Würth aqueous­based cleaner.
Careless handling can lead to serious injury and environmental damage.
The pressure spray is only to be used out­of­doors.
Only use other cleaning agents when there is no risk of damage either to the spray itself or of danger to persons
or the environment.
Not suitable for
● flammable liquids with a flashpoint below 55°C
● acids and alkalis (exceptions see above)
● wetting agents (tensides)
● liquids which are viscous or sticky or which leave residues (e. g. paints, greases)
● liquids at temperatures of over 30°C.
Under no circumstances use
● foreign sources of pressure
● for burning off
● for keeping and storing liquids.
Safety
Children and young people without
proper training must not use the
appliance.
Keep spray appliances out of the reach
of children.
Take precautions against misuse
when hazardous materials are in use.
Never spray people, animals, electrical
equipment or cables; never spray
against the wind or in surface water.
Never aim the end of the pipe towards
any other person or yourself.
It is prohibited to make repairs or
alterations to the container.
The safety valve must not be made
ineffective.
If atomising flammable liquids, avoid
any sources of ignition in the vicinity.
10
Do not leave the appliance under
pressure and/or let it stand in the sun.
Ensure that the appliance is not heated
above the maximum operating
temperature (→ Table 1).
Protect the appliance against frost.
Never blow the jets or valves through
with the mouth.
Only use spare parts and accessories
from the manufacturer.
We accept no liability for damage
caused by using any other
manufacturer's parts.
When handling hazardous substances,
wear suitable protective equipment.
When pumping, always keep checking
the piston manometer to ensure that the
maximum spraying pressure (→ Table 1)
is not exceeded.
Before filling, after use and before per­
forming any maintenance, always com ­
pletely release any residual pressure in
the container (→ Chapt. "After use", item 1).
