Mirage OmniVibe Notice D'utilisation page 2

IMPORTANT SAFETY INSTRUCTIONS!
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
8. PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
9. ONLY USE attachments/accessories specified by the manufacturer.
10. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
11. REFER all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
12. To completely disconnect this apparatus from the AC Mains, disconnect the power supply
cord plug from the AC receptacle.
13. The mains plug of the power supply cord shall remain readily operable.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
The lightning flash with arrowhead symbol. Within an equilateral triangle is intended to alert the user to
the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
WARNING:
To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment on and off, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
2
o w n e r s m a n u a l