PROMAT 4000877150 Mode D'emploi Original page 10

 Treat the product with care. Avoid mechanical shock, impact or dropping it
from any height. The product may be damaged.
Charging the Battery
Use the included USB charging cable to connect the charging socket on the
charging station (3) to a suitable USB port or use the included power mains
adaptor to connect to a suitable wall socket. Place the lamp in the charging station.
The build-in magnetic holder secures the lamp in the charging station.
During charging the battery control lights (2) on the front of the lamp indicate the
progress of the charging process.
The lamp can remain in the charging station, this way you always have a fully
charged lamp at your disposal.
Operation
 The ON/OFF button (5) is located on the back of the lamp. Press the ON/OFF
button to turn on the lamp. Press the ON/OFF button again to reduce the light
output of the lamp. Pressing the ON/OFF button once more turns off the lamp.
 Fold the hanging hook (4) out of the back of the lamp to hang the lamp at a
desired spot. This Place should be solid and sturdy so the hook cannot slip off.
This way you have both hands free for work.
 The lamp can also be attached to magnetic objects with the magnetic holder (6)
on the back or the foldable magnetic holder (8) on the bottom of the lamp.
Please keep in mind that the magnetic holder may cause scratches on the
surface used for attachment.
 The lamp is protected against water jets. Do not immerse it in liquids or expose
to very powerful water jets.
Maintenance and Storing
Do not use aggressive chemicals, solvents or abrasives to clean the lamp. Do not
allow liquids of any kind to enter the lamp or immerse the lamp in liquids of any
kind.
Store the lamp in a place away from direct sunlight, dust, humidity, extreme
temperatures and vibrations and out of the reach of children.
6
Operation