Fax +32 030 9904733
USE
Make sure that the fan is switched off (switch pos.0).
Insert the USB drive in the computer, take care to properly orient the plug in the USB.
Ventilation: select the desired speed with the selector.
▄ – Minimum speed ▌▌–Maximum speed
Flexible metal neck, Chrome plated, that permits to adjust the wind direction.
To turn off, turn the switch to position 0 and then remove the USB drive from the computer.
When not in use for long periods, the USB drive must always be removed from computer.
CLEANING AND MAINTENANCE
Attention: before normal cleaning, remove the plug from the socket.
• Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
• Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the
liquid, but first remove the plug from the socket. Carefully dry the appliance and make sure that all the
electrical parts are dry: in the case of doubt, ask for professionally qualified help.
• Periodically check the electric cord for damage; its replacement requires a special tool: contact an authorized
service center, also for any repairs.
• If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend
storing it in its original packaging.
• Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the
power cord (after making sure you have disconnected the plug from the computer) and make dangerous parts
harmless if children are allowed to play with them.
• Do not dispose of non-biodegradable products in the environment but dispose of them in accordance with
current law. At the end of its working life, the product must not be disposed of as urban waste. It must be
taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment
and health deriving from inappropriate disposal and enables the constituent materials to be recovered to
obtain significant savings in energy and resources.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar (Italy).
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don't change the page numbering.
Keep the language integrity.
6
12
/
Assembly page 6/16