Zoofari DE-22397 Notice D'utilisation page 3

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following
instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Package Contents (fig. A)
4 x Upper play circuits (1a)
4 x Lower play circuits (1b)
2 x End pieces (2)
1 x Ball (3)
1 x Instructions for use
Technical Data
Measurements for play circuit:
approx. 21.6 x 6.2 x 7.2cm (L x W x H)
Measurements for end piece:
approx. 5.7 x 6.2 x 8.6cm (L x W x H)
Date of manufacture (month/year):
08/2017
Intended Use
This item is a toy for cats of all ages, for non-
commercial use. The item appeals to your cat's
visual, audio and tactile senses, and keeps your
cat active.
Safety Information
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffoca-
tion.
• The item is not a toy, or a climbing appara-
tus! Please ensure that persons, especially
children, do not stand on the item, or pull
themselves up on it. The item can fall over.
Risk of injury!
• Make sure the product is stable before use.
• Place the product on a level and solid surface.
Do not place it near stairs.
• Do not place hazardous items like candles on
or near the product.
• Check the product regularly for wear. The item
may only be used if it is in perfect condition!
• The product may only be used for its intended
purpose.
Assembling the item (fig. B),
(fig. C)
1. Secure the upper parts of the rails (1a) onto
the lower parts (1b), as per fig. B.
2. Stick one set of rails onto the other from abo-
ve, so that the lugs (1c) of both rails fit into the
corresponding opposite grooves (fig. C).
3. Place the ball into one of the play circuits.
4. Assemble all the parts, as per fig. C.
Note: The play circuits can also be assembled
in the shape of a snake. In this case, the end
pieces (2) must be attached at both ends.
Disassembling the item (fig. E)
1. Turn the item over.
2. Press both handles (1d) simultaneously to one
side.
3. Without letting go of the handles (1d), pull
one set of rails up, and the other down, to
separate them from each other.
Compatibility (fig. D)
The item can be combined with the "scratching
toy" and the "butterfly cat toy".
Storage, cleaning
Always store the product in clean and dry condi-
tion at room temperature.
Only wipe clean with a dry cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.
GB/IE/NI 5