Setting Up The Unit As Stand With Machine Table (Accessories); Use With Metre Counter (Accessories) - Storch Tapetomat E Mode D'emploi

Setting up the unit as stand with machine
table (accessories)
Remove the round plastic plug from the vertical pipe of
the sub-structure.
Unfold the machine table and secure it. Engage the
unfolded table and the pins with the receptacle of the
sub-structure (Figure 3).
Lock the guide rollers when you are working. Undo the
guide rollers if you would like to move the pasting unit
including table on site to easily relocate the complete
system to another position.

Use with metre counter (accessories)

Place the rear of the top bracket of the metre counter on
the edge of the pasting tub and engage by clicking the
bottom bracket into place (Figure 4).
Reset the metre counter to 0 using the lateral lever,
insert the wallpaper into the pasting unit and place it on
the wallpaper.
There is a magnetic receptacle on the metre counter hol-
der for the roller knife.
Figure 3 - insert table in sub-structure
Figure 4 - insert metre counter
28