Setting Up The Pasting Unit On Pasting Tables; Setting Up The Unit As A Stand With Sub-Structure (Accessories) - Storch Tapetomat E Mode D'emploi

Setting up the pasting unit on pasting tables

Place the pasting tool on the pasting table and push it
against the edge of the table with its stop.
Remove the wallpaper holder rod and push the wallpaper
holder from the unit, for this purpose, pull the lock but-
tons and move the holder with the button (Figure 1).
Push the wallpaper roll onto the holder rod, fasten it
using the fixing discs and insert the holder rod and wall-
paper into the wallpaper holder.
Setting up the unit as a stand with sub-
structure (accessories)
Unfold the sub-structure and push the pasting unit with
the square frame of the tub opening into the black, pla-
stic brackets of the sub-structure.
Then engage the side parts of the pasting unit into the
aluminium guides on the opposite side of the unit (Figure
2).
Engage the holding rods and the wallpaper roll with the
receptacle on the sub-structure.
Secure the four guide rollers before starting work to
ensure the device is securely positioned. Unlock the unit
to easily move it even once it has been filled.
Figure 1 - pushing out the wallpaper holder
Figure 2 - inserting the pasting unit into the sub-structure
27