Philips SBC HD1500U Mode D'emploi page 18

18 ENGLISH
10a Listening to wireless headphone (included):
10b Listening to corded headphone (not included):
iii Pressing the 'Dolby Headphone' button repeatedly will allow you to toggle
between different DH rooms, and the bypass mode.You have the following
choices:
– DH1 – small room mode
– DH2 – large room mode
– DH3 – cinema mode
– Bypass – stereo downmixing
For details in using Dolby Headphone, please refer to 'Functional Overview'
section.
iv The 'Dolby Pro Logic II' indication will not be illuminated, since this is not a
valid option.There is no need to further process a multichannel signal.
• Switch on the wireless headphone.
The system status light will be illuminated in green.
• The headphone will tune automatically to the most recently used
transmission channel.
• In case the headphone does not tune properly to the transmitter, then
press the tuning button.
• Adjust the volume to the desired level with the headphone volume
control.
• For Bass and Treble enhancement, press the buttons on the right earshell
of the wireless headphones. Pressing repeatedly will activate/deactivate
the Bass and Treble enhancement.
Important!
Adjusting the volume control and DBE button on the base station has no
impact on the HD1500U wireless headphones.These functions only work
with corded headphones. (not included)
• You can connect up to 2 corded headphones to the base station.
• Adjust the volume on the base station (this has no effect on wireless
headphones)
• Enjoy bass enhancement by pressing the DBE button on the base station
(this has no effect on wireless headphones)
11 Most of the actions described above could be executed using the remote
control which is provided. For details, please refer to Functional Overview
section that follows.