Base Station (Back Panel) - Philips SBC HD1500U Mode D'emploi

24 ENGLISH
7 TRANSMIT
• The TRANSMIT indicator is illuminated in green when digital wireless
transmission is activated
• To deactivate the function, press the TRANSMIT button
• The default setting is ON
8 PHONES
2 x 6.3mm headphone output sockets allowing you to connect up to
2 corded headphones
9 VOLUME
Volume dial allows you to adjust volume level when you are using corded
headphones.
IMPORTANT!
Adjusting the volume level at the base station has no effect to the
HD1500U wireless headphone.To alter the volume level of HD1500U
wireless headphone, adjust the dial on the right ear shell.

Base station (Back Panel)

0 DIGITAL 1 / DIGITAL 2
DIGITAL 1 – S/PDIF input/ output
DIGITAL 2 – Optical digital input/ output
* Output connectors providing AASR function
! ANALOG 1/ ANALOG 2
• RCA stereo input (L/R)
• RCA stereo output (L/R) providing AASR function
@ GAIN
2- position slide switch to select the analog input gain (+ 6dB/ 0dB)
If your audio source's output signal is relatively weak, the sensitivity switch
provides the necessary additional amplification to the audio input signal
prior to processing.
• Set to +6dB in case of weak audio input signals
• Set to 0 dB in case of distorted audio input signals
Note: Both Analog 1 and Analog 2 have their own Gain switch.