Repair Parts - RIDGID WD30500 Mode D'emploi

SP6747-5 RIDGID 3 gallon ESF.qxp_SP6747 9/26/16 4:21 AM Page 10
Maintenance (continued)
Cord Maintenance
When vacuuming is complete, unplug the
cord and wrap it around the cord wrap
knobs. If the power cord is damaged,
it must be replaced by the manufacturer
or their service agent or by similarly
qualified personnel to reduce the risk of
accident.
Storage
Before storing your Vac, the drum should
be emptied and cleaned. The cord should
be wrapped around the cord wrap knobs
and the hose should be stored as
described in this manual. Accessories
should be kept in the same area as the
Vac so they can be readily available.
The Vac should be stored indoors.

Repair Parts

RIDGID 3 U.S. Gallon / 11 liter Wet/Dry vac
WD30500 Electrical Rating: 120 v, 7 A, 50/60 hz
WD3050M0 Electrical Rating: 127 v, 9 A, 60 hz
RIDGID parts are available on-line at www.RIDGIDparts.com
SERvICING OF DOUBlE-INSUlATED WET/DRY vAC
In a double-insulated Wet/Dry vac, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-insulated
appliance, nor should a means for grounding be added. Servicing a double-
insulated Wet/Dry vac requires extreme care and knowledge of the system,
and should be done only by qualified service personnel. Replacement parts
for a double-insulated Wet/Dry vac must be identical to the parts they replace.
Your double-insulated Wet/Dry vac is marked with the words "DOUBlE
INSUlATED" and the symbol
marked on the appliance.
To reduce the risk of injury from electrical shock, unplug power cord before
servicing the electrical parts of the Wet/Dry vac.
Model Number WD30500/WD3050M0
Always order by Part Number - Not by Key Number
WARNING
WARNING: To assure product
SAFETY and RElIABIlITY, any other
maintenance, repairs and adjustments
should be performed by Authorized
Service Centers, always using RIDGID
replacement parts.
(square within a square) may also be
10