Westfalia 313 174 300 107 Instructions De Montage page 23

Installation instructions:
Electrical system for towing hitch
Connecting the trailer module
11. Plug the 12-pin plug into the trailer module.
12. Fasten the trailer module (Fig. 2/4) in the left-hand cavity behind the tail light using some
velcro tape.
13. Connect the brown wires with the eyelet to the vehicle's ground point (Fig. 2/5) above the left-
hand tail light.
Connecting the fuse
1
Fig. 3: Fuse holder assembly
14. Let the quick-connect receptacle of the red cable (Fig. 3/5) of the cable harness and the one
of the supplied single red cable (Fig. 3/4) lock into place in the fuse holder (Fig. 2/6).
15. Install the yellow clip (Fig. 3/6).
16. Insert the fuse (Fig. 3/2) and fit the cover (Fig. 3/1).
Note
Ensure sufficient strain relief and correct installation of the fuse holder.
DC Vaneo
2 3 4
313 174 391 101 26/04
5 6
23