Publicité
Les langues disponibles
Les langues disponibles
Thank you for purchasing our product.
While we do our best to ensure the quality of all our products, occasional errors or omissions
may occur. If you notice a defect or missing parts, contact the distributor of the product.
Carefully read through the instructions contained in this manual before using this machine. It
provides you with important information about safety, use and maintenance.
GENERAL INSTRUCTIONS.-
In the interest of safety, the equipment must have at least 0.5 metres of free space around it.
You should always observe certain safety precautions when using electrical appliances,
including the following:
1 To reduce the risk of electrical shock, always unplug the unit immediately after use and before
proceeding to clean it.
2
Make sure that the mains supply voltage is suitable for the machine and it is connected to
earth before plugging it in. The supply voltage must be the same as that stated on the
characteristics plate and the holes in the wall socket outlet must match the pin configuration for
the plug on the machine. Do not use any type of adapter. If this is not the case, please consult
your supplier.
3
This unit has been designed for professional use.
4
Never leave the unit unattended when it is plugged in. Unplug it from the wall socket after
each exercise session.
5 Do not place your unit on any surface that might block a ventilation opening. Place a
protective sheet below your unit to protect the floor or carpet from possible damage.
6
Parents and/or those responsible for children must always be aware of their curious nature
and how this can often lead to hazardous situations and behaviour which could cause accidents.
This is why they should always be supervised. Do not allow children or the disabled to use the
appliance without the strict supervision of a qualified person. Under no circumstances should
this appliance be used as a toy.
7 The VibroBoost vibration platform is designed to withstand a user weight of 150Kg or less.
8 Keep your hands well away from any of the moving parts.
9
Use suitable clothing and footwear. Make sure that all laces/cords are tied correctly. To avoid
injury and unnecessary wear on the belt, make sure that your footwear is not dirty.
10
It is not advisable to keep your unit in a damp place for long periods as it will be prone to rust.
English
10
YV30R
Publicité
