Using The Accessories - Zanussi ZOHXX3X2 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8.2 How to set: Clock functions
How to change: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is
not set.
Step 1
- press repeatedly.
Step 2
,
- press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
- press repeatedly to change the time of day.
How to set: Duration
Step 1
Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
- press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4
Press any button to stop the signal.
Step 5
Turn the knobs to the off position.
How to set: Minute Minder
Step 1
- press repeatedly.
Step 2
,
- press to set the time.
The function starts automatically after 5 sec.
When the set time ends, the signal sounds.
Step 3
Press any button to stop the signal.
Step 4
Turn the knobs to the off position.
How to cancel: Clock functions
Step 1
- press repeatedly until the clock function symbol starts to flash.
Step 2
Press and hold:
The clock function turns off after few seconds.

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
- starts to flash.
- starts to flash.
- starts to flash.
.
- starts to flash.
.
9.1 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping of the shelf.
ENGLISH
35

Publicité

Table des Matières
loading

Table des Matières