Scansonic P3600 Guide D'instructions page 9

NOTE:
The duration of the charging process depends on the state of charge of the
battery.
General operation
Switch the unit on/off
- Switch the unit on by sliding the Power ON/OFF switch on the back
of the unit to ON position, the display on the unit will light and display
"Welcome to Digital Radio", and then the time digits "00:00" flashes in
the display.
- Standby/operating mode: You may then toggle between standby and
operating mode by pressing and holding the STBY/FUNC button (5).
- To switch off the unit, slide the Power ON/OFF switch to OFF position.
Notes:
1. When the unit is powered on the first time, it will enter FM mode as
default, short press the STBY/FUNC button to change the operating
mode circularly: AUX-IN, DAB, FM.
2. Time and date can automatically update on-air when the DAB radio is
operated. Anyway, it also can be set manually in any Operating mode.
3. ECO design:
● ECO Test Mode: The unit returns to standby mode after 10 seconds.
When you are in the DAB/AUX mode, press and hold the INFO button to
ON or OFF, a 10 sec count down will be shown on the screen, then back
to normal operation. It is the test mode for the factory, this function can't
be removed.
● Normal ECO Mode: Standby mode will be activated after 60 minutes
under different surface:
AUX mode: When there is No connection of external device/No sound/
Minimum volume comes from the unit.
DAB mode: When there is no signal comes from the unit.
The unit will not activate to Standby mode when no signal/no sound/
minimum volume in FM mode.
The unit will not activate to Standby mode when no sound/minimum
volume in DAB mode.
4. The display light will dim after 10 seconds automatically during Stand-by
mode.
P3600
FM DAB+
9