Télécharger Imprimer la page

Scansonic P3600 Guide D'instructions page 16

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SETTING AND USING THE ALARM
As well as a clock/calendar, there are two versatile wake-up alarms with
snooze facility. Each alarm can use a buzzer or a selection from any of the
audio sources for the alarm sound, an active alarm is indicated by a bell
icon in the left of the LCD display.
Note: the alarm parameters can only be set when the radio is on.
Set the Alarm 1
1. During operating mode, press & hold the
ALARM/SNOOZE button until the Alarm 1
menu is shown, meanwhile, the alarm 1 alert
icon flashes on the display.
2. Press OK button to enter Alarm 1 Wizard,
the alarm wizard prompts you for the
following parameters. Select a value for each
parameter in turn by using "DOWN" or "UP"
button and then press OK to confirm and
move on to the next parameter.
Alarm Parameters:
● On time – hours and minutes
● Duration – 15 | 30 | 45 | 60 | 90 minutes. If the alarm is not cancelled,
the radio returns to standby after this time period.
● Source – DAB | FM | Buzzer, If DAB or FM is chosen as the audio
source you will also be prompted to select the last played station or one
of the preset stations (if set).
● Daily | Once | Weekends | Weekdays, choose the days on which the
alarm is active.
● Alarm – Off | On
After Alarm on is selected, the alarm1 will be
armed automatically, the alarm1 alert icon stops
flashing.
16
P3600
FM DAB+

Publicité

loading