Scansonic P3600 Guide D'instructions page 11

- If you have poor reception of some stations causing the audio to break
up, you may wish to list only stations with good signal strength.
How to re-do a full scan
To re-do a full scan, you may either short press
the SCAN button or press the MENU button to
show the menu and then press OK button to
select Full Scan.
Manual Tune
As well as the normal method of scanning, you can also manually tune to a
particular channel/frequency. This can be useful for adjusting your antenna
to achieve the best possible reception and scanning a particular channel to
update the station list.
1. Press Menu button and then press "UP" to show the submenu: Manual
tune, press the OK button to enter.
2. Press "DOWN" or "UP" to display a
particular channel/frequency, press OK
button to tune to that channel/frequency.
The display shows a live indication of the
received signal strength on the selected
frequency. Adjustments to your antenna will
be manifested in the received signal strength
displayed.
Note: The slightly larger rectangle indicates the audio quality threshold – if
the signal strength, as indicated by the solid rectangles, falls below this
threshold the audio quality will deteriorate.
To remove stations that are listed but unavailable
1. Press Menu button and then press "DOWN" or "UP" to show the
submenu: Prune, press the OK button to enter the Prune option.
2. Press "UP" to select "Yes" and then press OK button to confirm to prune.
Note: this removes all invalid stations indicated in the station list with a '?'
in front of the station name.
Station Presets
The unit allows you to store up to 20 DAB stations for easy recall at any
time.
P3600
FM DAB+
11