Scansonic P3600 Guide D'instructions page 17

Set the Alarm 2
1. During operating mode, press & hold the
ALARM/SNOOZE button twice until the
Alarm 2 menu is shown, meanwhile, the
alarm 2 alert icon flashes on the display.
2. The other setting of Alarm2 refers to Alarm1 setting described above.
● At the set time, the alarm will sound, quietly at first, then gradually
building up to the set volume. When an alarm sounds, the bell icon in
the display flashes.
● To cancel the Alarm when it is activated, press and hold the ALARM/
SNOOZE button or STBY/FUNC button, the unit goes to standby.
Snooze
● When the alarm is activated (waking you), short press the ALARM/
SNOOZE button will stop the alarm one time. The Alarm icon "SNOOZE"
will show on the display & the alert icon flashes simultaneously to show
it is on Snooze status.
● The alarm will sound again after 10 minutes (default nap time).
System Settings
Time
The time and date can be updated manually or automatically. With auto-
update, the time and date are automatically synchronized with national time
signals broadcast over DAB and FM (when available). You can also select
the display format for the time and date.
- Select Menu > System, then press OK button
to enter the System menu.
P3600
FM DAB+
17