Télécharger Imprimer la page

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

1. Introduction
At the end of its life cycle, dispose of this product in accordance with local and national disposal regulations.
Thank you for buying the MML4! The programmable LED badge is a magnetic name card and display badge especially
designed for commercial applications. Power consumption is low and the badge is light, compact and easy to use.
2. Features & Specifications
• LED: 21 x 7 DOT MATRIX
• storage capacity: max.50 characters
• the display is 3 characters wide
• messages are stored when device is switched off
• slim design
• fixed with magnetic strip
• order of the available characters: ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789@-
/\&()$!?#*%~=+<>"."","","""(SPACE) etc.
• 4 scrolling speeds can be selected
• rear panel buttons: start/stop, speed, set, up, down, cancel
• power supply: DC 3V (spare battery: CR2032 or CR2032C)
• dimensions
• display: 65 x 13mm
• external: 80 x 42 x 7mm
• weight 33g (incl. battery)
3. Installing the Battery
Open the battery compartment according to the instructions on the cover. Insert the battery in the battery holder with
the anode facing up and push the compartment back into the housing.
4. Use
1. magnetic strip
2. START/STOP
3. SPEED
4. battery compartment
1. Install the 3.0V battery (type CR2032) and the device will
switch on the screen automatically.
2. Enter the characters to be displayed:
hold the SET button for more than 3 seconds to activate the setting mode (the letter A is displayed). Select the
required character with the UP or DOWN button and press SET once to confirm the character. Repeat this
procedure for the other characters. Hold the SET button to leave the setting mode. The programmed characters
will now be displayed in sequence.
3. Cancelling characters:
press CANCEL once to erase the last character. Hold CANCEL for 3 seconds to delete the entire message. The
device leaves the setting mode and displays the message programmed previously.
The information in this manual is subject to change without prior notice
MML4
MML4 – PROGRAMMABLE LED BADGE
5. SET
6. UP
7. DOWN
8. CANCEL
1
VELLEMAN

Publicité

loading

Sommaire des Matières pour Velleman MML4

  • Page 1 At the end of its life cycle, dispose of this product in accordance with local and national disposal regulations. Thank you for buying the MML4! The programmable LED badge is a magnetic name card and display badge especially designed for commercial applications. Power consumption is low and the badge is light, compact and easy to use.
  • Page 2 MML4 – PROGRAMMEERBARE LED BADGE 1. Inleiding Wanneer dit product het einde van zijn levensduur heeft bereikt, ontdoe er u dan van volgens de plaatselijke en nationale regelgeving inzake verwijdering. Dank u voor uw aankoop! De programmeerbare LED badge doet dienst als naamkaartje en display badge en werd speciaal ontworpen voor commerciële toepassingen.
  • Page 3 MML4 – PROGRAMMEERBARE LED BADGE 1. Introduction A la fin de sa durée de vie, débarrassez-vous de ce produit en respectant la législation d'élimination locale et nationale. Nous vous remercions de votre achat! Le badge LED programmable fait fonction de carte de visite et d'afficheur et a été...
  • Page 4 MML4 – INSIGNIA LED PROGRAMABLE 1. Introducción Tire las muestras inservibles en los correspondientes depósitos de eliminación de residuos según las leyes locales y nacionales. ¡Gracias por haber comprado el TRC8! Lea cuidadosamente las instrucciones del manual antes de utilizarlo.
  • Page 5 MML4 – PROGRAMMIERBARES LED-(NAMENS)SCHILD 1. Einführung Wenn der Lebenszyklus dieses Produktes zur Ende ist, entsorgen Sie dieses Produkt gemäß der örtlichen und nationalen Gesetzgebung bezüglich Entsorgung. Dieses programmierbare LED-Schild ist ein magnetisches Namensschild und eine Displaybadge und wurde speziell für kommerzielle Applikationen entworfen.