Start Up Instructions - Garland MULE 561 QG Manuel D'instructions

English

6. START UP INSTRUCTIONS

6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
1. Machine.
2. Right handlebar.
3. Spur.
4. Lower handlebar.
5. Transportation wheel.
6. Leftt handlebar.
7. Handlebar protection.
- Instruction manual.
1
2
Carefully inspect the product to ensure that there are
no damaged elements. If you find any damaged or
missing parts, do not use the machine until the defect
has been repaired or all the missing pieces replaced.
5
6
4
3
38/160
Using the machine without all of its parts or with
defective parts can cause severe personal injury.
6.2. ASSEMBLY
6.2.1. INSTALLATION OF THE SPUR
Insert the spur (H) (as shown in the figure) leaving it at
the required height and place the pin (T5) fixing it with
the circlip (T4).
T5
H
6.2.2. TRANSPORTATION WHEEL ASSEMBLY
Place the spring in the pivot w1 fixing it with the circlip
and in the protecting hole W2.
W1
Place the transport wheel as shown in the figure,
holding it with the screw and nut W3.
T4
W2