Télécharger Imprimer la page

Kicker KMT67 Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

Authorized KICKER Dealer:
Purchase Date:
Serial Number:
The KICKER KMT67 Long-Range Tower System is specifi cally designed for mounting in the open-air, using an
exponential-horn-loaded 20mm titanium tweeter and dual 6.75 inch (165mm) woofers to produce clean and
crisp sound over a long distance. The injection-molded ABS enclosure and speakers are UV treated, splash
resistant, and weather resilient. The woofers utilize a sealed cone and motor assembly, and an open-cell foam
protects the tweeter. Mount the KMT67 in your boat or get creative with a pair of them in the garage, on your 4x4
or side-by-side roll bars, or in any other bar-mounted application.
Model:
Woofer [in, mm]
Tweeter [in, mm]
Dome Material
Exponential Horn [in, mm]
Rated Impedance [Ω]
Peak Power Handling [Watts]
Continuous Power Handling [Watts RMS]
Sensitivity [1W, 1m]
Frequency Response [Hz]
Height [in, mm]
Width [in, mm]
Depth [in, mm]
INSTALLATION
Mounting: The sound produced by the KMT67 long-range tower system is directional. The enclosure may
be mounted vertically or horizontally; the billet-aluminum mounting brackets can accommodate any angle for
the optimum fi ring direction. Find the best location for stereophonic sound and, if necessary, add more KMT67
systems to the installation to help distribute and balance the sound. After determining the best mounting
locations, carefully check the areas where the mounting hardware and speaker cable will be placed. The KMT67
long-range tower system's billet-aluminum mounting brackets use seven sets of ABS plastic inserts to fi t most
wakeboarding tower and roll bar diameters.
The mounting hardware design provides versatility in angular positioning to direct the speaker's output to the
ideal listening position; however, it is not recommended to reposition the speakers excessively after they are
mounted. Custom mounting locations will require more preparation, work, and possibly customized hardware. If
the mounting location requires you to cut metal, avoid structural metal and braces. In either case, make sure the
speaker will not interfere with the vehicle's mechanisms or the party you are throwing out on your pontoon boat.
2
2014 KMT67 Rev D.indd 2
2014 KMT67 Rev D.indd 2
KMT67 Long-Range Tower System
Owner's Manual
MODEL:
KMT67
KMT67
6-3/4, 165
3/4, 20
Titanium
3-1/4x6, 83x151
4
300
150
93dB
50–21k
9, 229
19-1/16, 484
11, 280
8/8/2013 4:26:53 PM
8/8/2013 4:26:53 PM

Publicité

loading