Trouble Shooting - Mesis PressoMedical 3.0 Manuel De L'utilisateur

6

Trouble Shooting

1.
When product does not work
• Unplug the power plug once and reconnect it.
Make sure that the hose plug is completely connected to the main unit.
•
If the hose plug is not inserted correctly, it is disconnected or it is not connected,
•
it will not work.
Insert the hose plug all the way into the body.
•
* If the operation does not work, please contact the service center e-mail:
assistenzatecnica@mesis.eu
2.
When the product works but is not smooth
• Press the POWER button to turn on the device.
• Some functions may not work properly if the device has been kept at an unsuitable
temperature for a long time.
- Please use after 2 hours at room temperature
Check if the air hose is bent.
•
Check for air leaks.
•
1) If the hose is missing from the cuff Insert the missing hose into the hose inlet
of the cuff.
2) If the device and hose plug are connected incorrectly -> Insert the hose plug
firmly into the device.
3) If air leaks from the cuff or air hose, etc. — Please contact the customer service
center for repair and use.
It may cause static electricity during use, but it is not a malfunction of the product.
•
• There may be a wind noise while using the product, but this is to prevent the safety
of the user and damage to the product. It is a safety device and it is not a
malfunction.
3.
If the plug or power cord is damaged
• Please contact Customer Service Center for repair.
43