Initial Operation, Relay, Total Running Time (Date Of Initial Operation, Relay Switching Rate, Total Running Time) - Selve i-Marki Control W Notice D'utilisation

Programming
FUNCTION
(only when the operating device is disconnected, only for
qualified electricians)
INITIAL OPERATION, RELAY, TOTAL RUNNING TIME
(Date of initial operation, relay switching rate, total running time)
1. You have confirmed the ALARM SIGNAL ON/OFF, SWITCHING
TIME/BLOCKING TIME will appear.
2. Use the +/- button to choose between SWITCHING
TIME/BLOCKING TIME.
3. Confirm your selection by pressing OK. EXPERT MODE
OFF/ON will appear.
4. You can select the required setting using the +/- button.
5. Confirm by pressing OK. INITIAL OPERATION will appear.
6. Confirm by pressing OK. RELAY will appear. (RELAY denotes
the relay switching rate.)
7. Confirm by pressing OK. TOTAL RUNNING TIME will appear.
(TOTAL RUNNING TIME denotes the overall running time of
the timer.)
8. Confirm by pressing OK.
9. Press the MENU button to switch to operating mode.
61
GB