External On/Off/Switch, Alarm Signal On/Off (Processing External Signals, Processing Alarm Signals) - Selve i-Marki Control W Notice D'utilisation

GB
Programming
FUNCTION
(only when the operating device is disconnected, only for
qualified electricians)
EXTERNAL ON/OFF/SWITCH, ALARM SIGNAL ON/OFF
(Processing external signals, processing alarm signals)
1. You have confirmed the RUNNING TIME function. EXTERNAL
ON will appear. (EXTERNAL ON/OFF/SWITCH describes
the external control signals. Default setting ist EXTERNAL
SWITCH.)
2. You can select the required setting for the control inputs using
the +/- button.
3. Confirm your selection by pressing OK.
Note: The following dialog window will only be displayed if you have
selected DRIVE CONTROLLER.
4. ALARM SIGNAL ON will appear. (The default setting is ALARM
SIGNAL ON.)
5. You can switch the ALARM SIGNAL to ON or OFF using the
+/- button. Confirm by pressing OK.
6. The function ALARM SIGNAL ON/OFF has now been set.
Please read on for further programming options using the
FUNCTION menu.
60