Selve i-Marki Control W Notice D'utilisation page 49

Explanation of functions/terms used
WIND CONTROL
The wind threshold value is pre-set to 04.
The wind threshold value can be set to values ranging between
01 (slight winds) and 11 (strong winds).
Wind threshold
Value
1
2
3
4
5
6
7
8
9
10
11
The existing wind setting and the new setting to be made are
shown on the display. The new wind setting field flashes.
If the wind setting has not been reached for a period of
15 minutes, control commands may be executed again.
TEST MODE
Press and hold the OK button for approx. 5 seconds to activate
the TEST MODE.
The TEST MODE is used to check whether the sensory equipment
is functioning properly. When the TEST MODE is active, the word
TEST appears on the display.
In the TEST MODE the pre-set delay times are shortened.
Language (GB ENGLISH)
You can select your national language.
SUMMER/WINTER
SUMMER/WINTER describes the automatic clock adjustment
for daylight saving changes. If the default setting is ON, the i-Marki
Control W/WS adjusts lit automatically.
Speed (approx.)
m/s km/h
2
4 14
6 22
8 29
10 36
12 43
14 50
16 58
18 65
20 72
22 79
49
7
GB